Silicate decorative render “Rolosil ST”

“Rolosil ST” is a high-quality decorative render on silicate basis. It is distinguished by high strength and good water vapour permeability. It has good adherence to substrate and provides long-term and high water repellence. It is resistant to weather and UV rays. It is used for protection and decoration of exterior and interior mineral wall surfaces. It represents the finishing coat for thermal insulation facades. It is available in white shade and can be tinted in MAXIMIX system in shades with ST designation.

“Rolosil ST” is ideal for:
• For exterior use.

• Additionally protected against algae and fungi .
• ETA certified.
• Resistant to weather impact.
• Ready for use.

Application temperature: Optimum application temperature ranges from +10 °C do +25 °C. It must not be used below +8 °C as well as in bright sunshine, wind, fog and rain. Protect the newly coated surfaces, in optimum conditions, from the weather impact for at least 48 hours.

Scraped: 1,5 mm ≈ 2,7 kg/m²; 2,0 mm ≈ 3,0 kg/m².
Smoothed: 1,5 mm ≈ 2,9 kg/m²; 2,0 mm ≈ 3,3 kg/m².

Shelf life and storage: 9 months from the date of production stated on the packaging. Keep in the original, properly sealed and undamaged packaging at the temperatures ranging from +5 °C do +25 °C, protected from the direct sunlight. Keep out of children’s reach.

Scroll to Top

Форма за запитване

Изпратете Вашето запитване и ние ще Ви потърсим в кратък срок, за да съдействаме. 

Inquiry form

Submit your inquiry and we will contact you shortly to assist.