Mineral wool prefabricated pipes “Izocam”
They are used for insulation of industrial pipes, central heating and solar installations. Prevent condensation and reduce heat loss. The maximum operating temperature of the material is + 250 °C. The modules are high density and can be uncoated or coated with aluminium foil. They are certified according to standard TS EN 14303 – Thermal insulation products for construction facilities and industrial installations. The appropriate diameter of the insulation module is selected depending on the outer diameter of the pipe to be insulated. The modules have a longitudinal cut on one side and are easily installed on the pipes. If they are installed outdoors, a protective coating must be laid on them – a bitumen membrane or sheet metal cladding. The modules, which are covered with aluminum foil, have a lengthwise self-adhesive aluminum sticker with which the longitudinal section of the insulation is glued during installation. The foil acts as a vapor barrier. The joints between the individual modules are additionally bandaged with aluminum tape. Knee insulation is made by cutting segments from straight modules, depending on the curve of the knee.
Mineral wool pipe insulation from “Izocam” ideal for thermal insulation of:
– Industrial pipes.
– Central heating installations.
– Solar installations.
• Very good thermal insulation properties.
• Fire safety.
• Fast and easy installation.
• High sound and vibration insulation.
Cylindrical modules of fine glass fibre, of inorganic origin, bonded with a resinous binder and formed into modules.
Diameter: 1/4″ to 14″ (inclusive).
Insulation thickness: 25 to 100 mm.
Module length: 1.20 m.
Application temperature up to 250º C.
