Decorative scratched facade plaster “Acrylic Smooth Render”
“Acrylic Smooth Render” is a plaster based on polymer ingredients. The applied plaster gives a uniform-grained appearance to the surface. Adheres well to fine and rough construction surfaces.
It is used for decorative protection of facade surfaces.
• High durability.
• High water repellency.
• Relatively high vapor permeability.
• Suitable as a finishing plaster in contact with a coating of a thermal insulation system made of mineral wool.
• High resistance to atmospheric influences.
• Additional protection against the development of mold and mildew.
• Resistance to any climatic conditions.
Color shades: White (color 1001), base 1000; JUMIX * 348 shades from – JUB’s color catalog for paints and plasters (1.5 and 2.0 plasters only), * 200 shades from – JUB’s color catalog for paints and plasters – shades ending in 2,3,4, and 5 (only for plaster 2.5).
Technical data: Granulation: 1.0, 1.5, 2.0, and 2.5 mm; Consumption rate: approximately 2.1 – 5.0 kg/m2 (depending on granulation); Density: approximately 1.75 kg/l; µ coefficient (EN 1015-19): <165; Sd value (EN ISO 7783-2): <0.40 m ; Drying before reapplying (T: +20ºC, relative humidity: 65%): 6 hours; Protection against getting wet from rain: approximately 24 hours; Water absorption (EN 1062-3): 0.30 N/mm2;
Surface: The surface should be slightly rough, hard, dry and clean, free of poorly-adhered particles, dust, grease, and other dirt. Suitable surfaces: fine mineral plasters of all kinds, basic thermal insulation plasters (cement-based), concrete surfaces, fibre-cement, plasterboard, chipboard and MDF boards and the like. Unsuitable: surfaces painted with facade paints, limestone-based paints, oil paints, varnishes and enamels. For primer, use UNIGRUND or ACRYLCOLOR diluted with water.
Preparation and application: Mix the mixture in a bucket using an electric mixer. Level the mixture before use. If necessary, dilute with water. Apply by hand with a steel trowel. Smooth the surface with circular sanding using a large plastic smoothing trowel to achieve the smoothest appearance possible. Cleaning of working tools: wash with water.
Consumption per m²: 2.1 – 5.0 kg
Packaging: 25 kg plastic box
Storage: 12 months in original sealed undamaged packaging in dry and ventilated rooms at temperatures from +5°C to +25°C. It should not freeze. Keep out of direct sunlight.
*The product is available only at the “DI TRADE GROUP” warehouse in Sofia