Decorative scratched facade plaster “Silicon Smooth Render”
“Silicon Smooth Render” is a plaster made from the combination of silicone and other polymer elements. The applied plaster gives a uniform-grained appearance to the surface. Adheres well to fine and rough construction surfaces.
It is used for decorative protection of facade wall surfaces.
• Relatively high vapor permeability.
• Long-lasting water repellency due to the silicone element, which also contributes to preventing the adhesion of dust, soot, and other dirt to the painted surface, as well as to high durability.
• High resistance to atmospheric influences.
• Resistant also for facade surfaces of high-rise buildings that are extremely exposed to precipitation and have convex roofs.
• Long-lasting protection against the development of wall mold and mildew.
Color shades: White (color 1001); JUMIX: JUB’s color catalog for paints and putties (shades marked with * and ending in 2,3,4, and 5).
Technical data: Granulation: 1.5, 2.0, and 2.5 mm; Consumption rate: approximately 2.4 – 4.7 kg/m2 (depending on granulation); Density: approximately 1.85 kg/l; μ vapor permeability (EN 1015-19): <200; Sd value (EN ISO 7783-2): <0.40 m class I – high vapor permeability; Drying before reapplying (T: +20ºC, relative humidity: 65%): 6 hours; Protection against getting wet from rain: approximately 24 hours; Water absorption (EN 1062-3): 0.25 N/mm2;
Surface: The surface should be slightly rough, hard, dry and clean, free of poorly-adhered particles, dust, grease, and other dirt. Suitable surfaces: fine mineral plasters of all kinds, basic thermal insulation plasters (cement-based), concrete surfaces, fibre-cement, plasterboard, chipboard and MDF boards and the like. Unsuitable surfaces: surfaces that have been painted with facade paints, lime-based paints, oil paints, varnishes and enamels. For priming, use UNIGRUND or JUBOSIL F diluted with water.
Preparation and application: Mix the mixture in a bucket using an electric mixer. Level the mixture before use. Dilute with water (if necessary, max. 1%). Apply by hand with a steel trowel. A few minutes after application, level the surface in a circular motion using a solid plastic leveling trowel. Cleaning of work tools: wash tools with water immediately after use.
Consumption per m²: 2.4 – 4.7 kg
Packaging: 25 kg plastic box
Storage: 12 months in original sealed undamaged packaging in dry and ventilated rooms at temperatures from +5°C to +25°C. It should not freeze. Keep out of direct sunlight.
*The product is available only at the “DI TRADE GROUP” warehouse in Sofia
