Dry interior decorative plaster “Dekoral”
“Dekoral” is a plaster made on the basis of white cement, hydrated lime, organic additives and mineral fillers. Gives a typical domestic look to the surface. The thickness of the plaster is at least 3 and at most 10 mm. The product complies with the requirements of the EN 998-1 standard.
It is used for decorative protection of interior wall surfaces.
• Domestic appearance.
• High durability.
• High vapor permeability.
Color shades: White
Technical data: Consumption rate: 2.5 to 10.0 kg./m2 depending on the thickness and the desired structure during application; Density: approximately 1.34 kg/l; Tensile strength (EN 1015-11): > 6 N/mm2; μ vapor permeability (EN 1015-19): <12; Sd value (EN ISO 7783-2): <0.07 m class I – high vapor permeability; Drying before reapplying (T: +20ºC, relative humidity: 65%): 6 hours; Protection against getting wet from rain: approximately 24 hours; Water absorption (EN 1062-3): <0.5 kg/m2h0.5; Thermal conductivity: 0.93 W/mK; Flammability: A1; Surface: The surface must be flat, slightly rough, hard, dry and clean, free of poorly-adhered particles, dust, grease, and other dirt. Suitable surfaces: JUBIZOL systems, fine mineral plasters of all kinds, concrete surfaces, fiber-cement and plasterboard boards. Unsuitable surfaces: all surfaces painted with facade paints, lime-based paints, oil paints, lacquers and enamels, as well as surfaces made of plastics and wood.
Preparation and application: Prepare the mixture in a concrete mixer, or in a plastic container of suitable size if the mixing is done with a hand-held electric mixer. Apply manually with a steel leveling trowel or mechanically by spraying. Apply within approximately 2 hours. Cleaning of work tools: wash tools with water immediately after use.
Consumption per m²: 2.5 – 10 kg
Packaging: 20 kg paper bags
*The product is available only at the “DI TRADE GROUP” warehouse in Sofia