“Slate Lite Falling Leaves” Stone Veneer
“Slate Lite Falling Leaves” is a thin veneer of real stone. The 100% natural stone surface is reinforced on the back with fiberglass for better stability and ease of handling.
For the production of “Slate Lite Falling Leaves”, the most beautiful blocks of slate are selected from all over the world: With this revolutionary method, it is possible to produce very very thin stone layers from massive blocks of slate up to 5 tons. During production, the fiberglass base is applied in liquid form to the slate block and the thin stone layer is peeled off by hand.
Note: each plate has a unique appearance – no repetition!
- Application
- Advantages
- Technical specification
• Universal product with a variety of applications:
• Interior and exterior wall coverings.
• Flooring.
• Coverings for bathroom and kitchen.
• Facade cladding.
• “Slate Lite Falling Leaves” is characterized not only by the beautiful natural colors and structures, but also by other properties:
• “Slate Lite Falling Leaves” is a very thin and completely flexible sheet.
• “Slate Lite Falling Leaves” is very light: it weighs only 1.5 kg per m², which also significantly reduces transport costs compared to solid stone slabs and also helps to reduce the degradation of natural resources.
• All chemical components of “Slate Lite Falling Leaves” are harmless to health and meet the highest quality standards.
•100% natural stone surface.
• Harder and stronger than stone tiles by reinforcing with polyester resin.
• Thickness: 1.5 – 2.0 mm.
• Weight: approx. 1.5 kg / m².
• Standard format: 1220 x 610 mm.
• Tolerance: 1 – 2 mm length and width.
• Fire protection Cfl-s1 (EN 13501-01) / B1 (DIN 4102): Floors.
• Available fire retardant material (Cs3d0): Walls.
• Maximum temperature 120 ° C.
• Abrasion class: PEI II: For areas with medium traffic and low abrasion.