Decorative facade plaster “Silicate Trowelled Render”
“Silicate Trowelled Render” is a plaster made on the basis of water glass. The applied plaster gives the striated surface an appearance resembling oak bark. Adheres well to fine and rough construction surfaces.
- Application
- Advantages
- Technical specification
It is used for decorative protection of facade and interior wall surfaces.
• High durability.
• Non-flammable.
• High vapor permeability.
• High resistance to atmospheric influences.
• Additional protection against the development of mold and mildew.
Color shades: White (color 1001); JUMIX: JUB’s color catalog for paints and putties (shades marked with * and ending in 2,3,4, and 5).
Technical data: Granulation: 2.0 and 2.5 mm; Consumption rate: approximately 2.5 – 3.2 kg/m2 (depending on granulation); Density: approximately 1.70 kg/l; µ coefficient (EN 1015-19): <200; Sd value (EN ISO 7783-2): <0.40 m class I – high vapor permeability; Drying before reapplying (T: +20ºC, relative humidity: 65%): 6 hours; Protection against getting wet from rain: approximately 24 hours; Water absorption (EN 1062-3): 0.25 N/mm2;
Surface: The surface should be slightly rough, hard, dry and clean, free of poorly-adhered particles, dust, grease, and other dirt. Suitable surfaces: fine mineral plasters of all kinds, basic thermal insulation plasters (cement-based), concrete surfaces, fibre-cement, plasterboard and the like. Not suitable: surfaces painted with facade paints, lime-based paints, oil paints, varnishes and enamels, as well as surfaces made of plastic compounds and wood surfaces. For priming, use UNIGRUND or JUBOSIL FX : JUBOSIL GX : water = 1: 1: 1.
Preparation and application: Mix the mixture in a bucket using an electric mixer. Uniform the mixture before use. Thin with JUBOSIL GX (100ml/bucket). Apply the mixture with a stainless steel trowel. Before application, be sure to protect: thresholds, glass and window and door frames, as stains cannot be removed. Cleaning of working tools: wash with water.
Consumption per m²: 2.5 kg – 3.2 kg
Packaging: 25 kg plastic box
Storage: 12 months in original sealed undamaged packaging in dry and ventilated rooms at temperatures from +5°C to +25°C. Keep away from moisture. Keep out of direct sunlight.
*The product is available only at the “DI TRADE GROUP” warehouse in Sofia