Silicate scratched facade plaster “Silicate Smooth Render”
“Silicate Smooth Render” is a plaster made on the basis of water glass. The applied plaster gives a uniform-grained appearance to the surface. Adheres well to fine and rough construction surfaces.
It is used for decorative protection of facade and interior wall surfaces.
• High durability.
• Non-flammable.
• High vapor permeability.
• High resistance to atmospheric influences.
• Additional protection against the development of mold and mildew.
Color shades: White (color 1001); JUMIX: JUB’s color catalog for paints and putties (shades marked with * and ending in 2,3,4, and 5).
Technical data: Granulation: 1.0, 1.5, 2.0, and 2.5 mm; Consumption rate: approximately 2.4 – 5.5 kg/m2 (depending on granulation); Density: approximately 1.85 kg/l; µ coefficient (EN 1015-19): <200; Sd value (EN ISO 7783-2): <0.40 m class I – high vapor permeability; Drying before reapplying (T: +20ºC, relative humidity: 65%): 6 hours; Protection against getting wet from rain: approximately 24 hours; Water absorption (EN 1062-3): 0.25 N/mm2;
Surface: The surface should be slightly rough, hard, dry and clean, without poorly-adhered particles, dust, grease, and other dirt. Suitable surfaces: fine mineral plasters of all kinds, basic thermal insulation plasters (cement-based), concrete surfaces, fibre-cement, plasterboard, chipboard and MDF boards and the like. Not suitable: surfaces painted with facade paints, limestone-based paints, oil paints, varnishes and enamels, as well as surfaces made of plastics and wooden surfaces. Prime with UNIGRUND or JUBOSIL FX: JUBOSIL GX:water = 1:1:1.
Preparation and application: Stir the mixture with a mixer. Level the mixture before use. Apply manually or mechanically. Smooth the surface with circular sanding using a plastic smoothing trowel to achieve the smoothest appearance possible. Before application, be sure to protect: thresholds, glass and window and door frames, as stains cannot be removed. Cleaning of working tools: wash with water.
Consumption per m²: 2.4 – 5.5 kg
Packaging: 25 kg plastic box
Storage: 12 months in original sealed undamaged packaging in dry and ventilated rooms at temperatures from +5°C to +25°C. Keep away from moisture. Keep out of direct sunlight.
*The product is available only at the “DI TRADE GROUP” warehouse in Sofia