Decorative valerized plaster “Valiplast”
“Valiplast” is a plaster made on the basis of polymer particles. The external appearance of the relief depends on the technique and tool used to structure the applied plaster. Adheres well to fine and rough construction surfaces.
It is used for decorative protection of facade and interior wall surfaces.
• High durability.
• Adheres well to the surface.
• High vapor permeability.
• Resistant to the effects of smoke and UV rays.
Color shades: White (color 1001).
Technical data: Consumption rate: approximately 1 to 2 kg/m2 depending on thickness and structure; Density: approximately 1.75 kg/l; μ vapor permeability (EN 1015-19): <400; Sd value (EN ISO 7783-2): <0.12 m class I – high vapor permeability; Drying before reapplying (T: +20ºC, relative humidity: 65%): 6 hours; Protection against getting wet from rain: approximately 24 hours; Water absorption (EN 1062-3): 0.15 N/mm2;
Surface: The surface must be flat, slightly rough, hard, dry and clean, free of poorly-adhered particles, dust, grease, and other dirt. Suitable surfaces: JUBIZOL system, fine plasters of all kinds, concrete surfaces, fiber-cement and plasterboard boards. Not suitable: all surfaces painted with facade paints, lime-based paints, oil paints, lacquers and enamels, as well as surfaces made of plastics and wood.
Preparation and application: Apply manually with a steel leveling trowel or mechanically in a 1-3 mm thick layer. The surface with freshly applied plaster can be treated with a foam roller. Cleaning of work tools: wash tools with water immediately after use.
Consumption per m²: 1 – 2 kg.
Packaging: 8kg, 25kg plastic box.
Storage: 12 months in original sealed undamaged packaging in dry and ventilated rooms at temperatures from +5°C to +25°C. Keep away from moisture. Keep out of direct sunlight.
*The product is available only at the “DI TRADE GROUP” warehouse in Sofia
