Single-layer interior washable paint “Jupol Gold”
“Jupol Gold” does not contain ingredients harmful to the environment and health, has good coverage and is made on the basis of a water dispersion of polymer adhesives. It is used for decorative protection of exposed walls and ceilings, where it is necessary to notice the aesthetic appearance of the painted surfaces. It is available in a wide range of colors, according to the following color schemes: JUB paints and plasters, NCS and RAL classic. The production of this paint is under the constant supervision of TÜV SÜD Industrie Service GmbH, München.
“Jupol Gold” is ideal for:
• Exposed walls and ceilings, where it is necessary to notice the aesthetic appearance of the painted surfaces.
• Resistant to wet rubbing with universal household detergents.
• Good coverage.
• Extremely low content of volatile organic compounds.
• Easy to apply and available in a wide range of colors.
• With high vapor permeability.
Color shades: White (color 1001), base 1000, and base 2000; JUMIX: – The color catalog of JUB paints and plasters; – The NCS Color Catalog; It is possible to color it in pastel tones with DIPI KONCENTRAT.
Consumption: 160 – 190 ml/m2 for two-layer application Density: approximately 1.60 kg/l μ coefficient: <400 Sd value (EN ISO 7783-2): <0.04 m, class I – high vapor permeability Volatile organic compounds (VOC): <0.1 g /l To dry before second application (T: +20 ºC, relative humidity: 65 %): to be dry to the touch: approximately 3 hours; after further treatment after 4 – 6 hours Resistance to wet rubbing: good resistance – class 3 Transparency: class 2 with coverage of 7.5 m2/l Appearance: matt Surface: The surface must be hard, dry and clean, free of dust, grease stains or other dirt. Suitable surfaces: fine plasters of all types, surfaces leveled with self-leveling compounds, embossed wallpaper, soft wallpaper, embossed fiberglass wallpaper, as well as gypsum and fiber-cement boards, unplastered concrete and the like. It is also possible to apply on well-adhered old dispersion layers and decorative screeds. Unsuitable surfaces: surfaces painted with limestone-based paints.
Preparation and application: Cover a cleaned surface with a suitable primer before painting. The paint is applied with a roller, brush or by spraying. Can be diluted in water up to 10% (if necessary). First mix the paint well, then thin it or add colorant. Cleaning of working tools: wash the tools with water.
Consumption per m²: About 190ml/m2 for 2 coats.
Packaging: 0.75l, 2l, 5l, 10l, 15l plastic buckets.
Storage: 18 months in original sealed undamaged box in dry and ventilated rooms at temperatures from +5 °C to +25 °C. It should not freeze.
